CCD Board Designs
CCD MITLL Interconnect Board,
EL-1240
SCHEMATIC: boards/EL1240/mitllint-esi.sch.pdf
This board lives inside the dewar.
It is laid out specifically for the MIT/Lincoln Labs CCD as used in the ESI
dewar. This board does the 'cross wiring' that matches the generic incoming
signals from the EL-1227 board to the connector from the CCD. It also has the
AC coupling capacitors for the video output from the CCD. Lastly, it provides
a 4-pin connector for the temperature diode and the heater resistor.