Subject: analog readings of power supplies
Date: Fri, 26 Oct 2001 14:23:50 -0700
From: Ted Cantrall
Organization: UCO/Lick Observatory
To: Dean Tucker , Will Deich
CC: Alcott Barry

Hi, Dean & Will

These are the voltages you should be reading from the analog board for the various power supplies.

Voltage Nominal Error-Condition

Supply	Reading	Low	High
+-12v	4.405	3.72	4.72
+ 5v	5.00	4.75	5.25
+ 28v	4.95	4.60	5.31	(+-.354) Barrel motors
+ 48v	4.96	4.61	5.32	(+-.354) Cradle motor

This above line is what we want to have eventually.
Below will have to do for now.

Supply	Reading	Low	High
+ 48v	8.49	8.14	8.84	(+-.354) Cradle motor

-ted-

- - - - - - - - - - - Univ Calif at Santa Cruz - - - - - - - - - - -
ted@ucolick.org Work (831)459-2110 FAX (831)459-4097
He has showed you, O man, what is good; and what does the Lord require of you but to do justice and to love kindness and to walk humbly with your God? [Micah 6:8 (RSV)]
- - - - - - - - - - http://www.ucolick.org/~ted/ - - - - - - - - - -
"One of life's most painful lessons is that life's lessons can be very painful." "After 30, a large part of life consists of managing the decline." "Chocolate may not fix a problem, but it does put it in a new perspective."